^tools/blktap/ublkback/ublkback$
^tools/blktap/xen/.*$
^tools/check/\..*$
-^tools/examples/xmexample\.vmx$
^tools/console/xenconsoled$
^tools/console/xenconsole$
^tools/debugger/pdb/pdb$
XEN_SCRIPTS += block-file
XEN_SCRIPTS += block-enbd
-XEN_BOOT_DIR = /usr/$(LIBDIR)/xen/boot
+# no 64-bit specifics in mem-map.sxp
+# so place in /usr/lib, not /usr/lib64
+XEN_BOOT_DIR = /usr/lib/xen/boot
XEN_BOOT = mem-map.sxp
XEN_HOTPLUG_DIR = /etc/hotplug
XEN_HOTPLUG_SCRIPTS = xen-backend.agent
-all:
+all:
build:
install: all install-initd install-configs install-scripts install-boot \
install-hotplug
-xmexample.vmx: xmexample.vmx.in
- sed -e 's/@@LIBDIR@@/$(LIBDIR)/' < $< > $@
-
install-initd:
[ -d $(DESTDIR)/etc/init.d ] || $(INSTALL_DIR) $(DESTDIR)/etc/init.d
$(INSTALL_PROG) $(XEND_INITD) $(DESTDIR)/etc/init.d
done
clean:
- $(RM) xmexample.vmx
--- /dev/null
+# -*- mode: python; -*-
+#============================================================================
+# Python configuration setup for 'xm create'.
+# This script sets the parameters used when a domain is created using 'xm create'.
+# You use a separate script for each domain you want to create, or
+# you can set the parameters for the domain on the xm command line.
+#============================================================================
+
+import os, re
+arch = os.uname()[4]
+if re.search('64', arch):
+ arch_libdir = 'lib64'
+else:
+ arch_libdir = 'lib'
+
+#----------------------------------------------------------------------------
+# Kernel image file.
+kernel = "/usr/lib/xen/boot/vmxloader"
+
+# The domain build function. VMX domain uses 'vmx'.
+builder='vmx'
+
+# Initial memory allocation (in megabytes) for the new domain.
+memory = 128
+
+# A name for your domain. All domains must have different names.
+name = "ExampleVMXDomain"
+
+# Which CPU to start domain on?
+#cpu = -1 # leave to Xen to pick
+
+# Optionally define mac and/or bridge for the network interfaces.
+# Random MACs are assigned if not given.
+#vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0' ]
+
+#----------------------------------------------------------------------------
+# Define the disk devices you want the domain to have access to, and
+# what you want them accessible as.
+# Each disk entry is of the form phy:UNAME,DEV,MODE
+# where UNAME is the device, DEV is the device name the domain will see,
+# and MODE is r for read-only, w for read-write.
+
+#disk = [ 'phy:hda1,hda1,r' ]
+disk = [ 'file:/var/images/min-el3-i386.img,ioemu:hda,w' ]
+
+#----------------------------------------------------------------------------
+# Set according to whether you want the domain restarted when it exits.
+# The default is 'onreboot', which restarts the domain when it shuts down
+# with exit code reboot.
+# Other values are 'always', and 'never'.
+
+#restart = 'onreboot'
+
+#============================================================================
+
+# New stuff
+device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
+
+# Advanced users only. Don't touch if you don't know what you're doing
+memmap = '/usr/lib/xen/boot/mem-map.sxp'
+
+#-----------------------------------------------------------------------------
+# Disk image for
+#cdrom=
+
+#-----------------------------------------------------------------------------
+# boot on floppy (a), hard disk (c) or CD-ROM (d)
+#boot=[a|c|d]
+#-----------------------------------------------------------------------------
+# write to temporary files instead of disk image files
+#snapshot=1
+
+#----------------------------------------------------------------------------
+# enable SDL library for graphics, default = 0
+sdl=0
+
+#----------------------------------------------------------------------------
+# enable VNC library for graphics, default = 1
+vnc=1
+
+#----------------------------------------------------------------------------
+# enable spawning vncviewer(only valid when vnc=1), default = 1
+vncviewer=1
+
+#----------------------------------------------------------------------------
+# no graphics, use serial port
+#nographic=0
+
+
+#-----------------------------------------------------------------------------
+# enable audio support
+#enable-audio=1
+
+
+#-----------------------------------------------------------------------------
+# set the real time clock to local time [default=0 i.e. set to utc]
+#localtime=1
+
+
+#-----------------------------------------------------------------------------
+# start in full screen
+#full-screen=1
+++ /dev/null
-# -*- mode: python; -*-
-#============================================================================
-# Python configuration setup for 'xm create'.
-# This script sets the parameters used when a domain is created using 'xm create'.
-# You use a separate script for each domain you want to create, or
-# you can set the parameters for the domain on the xm command line.
-#============================================================================
-
-#----------------------------------------------------------------------------
-# Kernel image file.
-kernel = "/usr/@@LIBDIR@@/xen/boot/vmxloader"
-
-# The domain build function. VMX domain uses 'vmx'.
-builder='vmx'
-
-# Initial memory allocation (in megabytes) for the new domain.
-memory = 128
-
-# A name for your domain. All domains must have different names.
-name = "ExampleVMXDomain"
-
-# Which CPU to start domain on?
-#cpu = -1 # leave to Xen to pick
-
-# Optionally define mac and/or bridge for the network interfaces.
-# Random MACs are assigned if not given.
-#vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0' ]
-
-#----------------------------------------------------------------------------
-# Define the disk devices you want the domain to have access to, and
-# what you want them accessible as.
-# Each disk entry is of the form phy:UNAME,DEV,MODE
-# where UNAME is the device, DEV is the device name the domain will see,
-# and MODE is r for read-only, w for read-write.
-
-#disk = [ 'phy:hda1,hda1,r' ]
-disk = [ 'file:/var/images/min-el3-i386.img,ioemu:hda,w' ]
-
-#----------------------------------------------------------------------------
-# Set according to whether you want the domain restarted when it exits.
-# The default is 'onreboot', which restarts the domain when it shuts down
-# with exit code reboot.
-# Other values are 'always', and 'never'.
-
-#restart = 'onreboot'
-
-#============================================================================
-
-
-# New stuff
-device_model = '/usr/@@LIBDIR@@/xen/bin/qemu-dm'
-
-# Advanced users only. Don't touch if you don't know what you're doing
-memmap = '/usr/@@LIBDIR@@/xen/boot/mem-map.sxp'
-
-#-----------------------------------------------------------------------------
-# Disk image for
-#cdrom=
-
-#-----------------------------------------------------------------------------
-# boot on floppy (a), hard disk (c) or CD-ROM (d)
-#boot=[a|c|d]
-#-----------------------------------------------------------------------------
-# write to temporary files instead of disk image files
-#snapshot=1
-
-#----------------------------------------------------------------------------
-# enable SDL library for graphics, default = 0
-sdl=0
-
-#----------------------------------------------------------------------------
-# enable VNC library for graphics, default = 1
-vnc=1
-
-#----------------------------------------------------------------------------
-# enable spawning vncviewer(only valid when vnc=1), default = 1
-vncviewer=1
-
-#----------------------------------------------------------------------------
-# no graphics, use serial port
-#nographic=0
-
-
-#-----------------------------------------------------------------------------
-# enable audio support
-#enable-audio=1
-
-
-#-----------------------------------------------------------------------------
-# set the real time clock to local time [default=0 i.e. set to utc]
-#localtime=1
-
-
-#-----------------------------------------------------------------------------
-# start in full screen
-#full-screen=1
XEN_ROOT = ../..
include $(XEN_ROOT)/tools/Rules.mk
+# vmxloader is a 32-bit protected mode binary.
+# It belongs in /usr/lib, not /usr/lib64.
TARGET := vmxassist/vmxloader
INSTALL_DIR := $(DESTDIR)/usr/lib/xen/boot
projects / xen.git / commitdiff